General Information

- The Onga Pantera PPP550 Pool Pump is ideal for in-ground and above ground pools

- Reliable and efficient pump operation

- 3 Year Warranty

- Large Hair and Lint Pot with easy to remove see through lid

- WA Rewind Co. carries out the repairs for Onga pumps in our factory, no handballing to anyone else

- New technology wet end design protects the motor from water damage


Technical Information
Operating Conditions

- Fluid - Water
- Maximum Working Pressure - 295kPa
- Water (smimming pool) Temperature
  Range - 5° C to 35° C
- Ambient Temperature - 50° C Maximum

Motor

- Type - TEFC 2 Pole Continuously Rotated
- Normal Speed - 2800rpm
- IP Rating - IP55
- Insulation Class - Class F
- Thermal Overload - Inbuilt Auto Reset
- Temperature Rise - Class B
- Frequency - 50Hz
- Voltage - 230-240
- Bearing Type - Deep groove ball bearing
  with double contact lip seal
- Bearing Temperature Rating - 150° C

Materials

- Pump Casing - 20% Glass Filled ABS
- Impeller - 20% Glass Filled Polycarbonate
- Baffle - 20% Glass Filled ABS
- Diffuser - 20% Glass Filled ABS
- Yoke - 20% Glass Filled ABS
- Drain Cap - Polypropylene
- Shaft Sleeve - Nylon
- Motor Shaft - 400 Series Stainless Steel
- End Shield - Powder Coated Cast Iron
- Hair and Lint Pot O-ring - Low Friction Nitrile
- Casing O-ring - Nitrile
- Barrel Union O-ring - Nitrile
- Barrel Union - ABS
- Hair and Lint Pot Lid - Polycarbonate
- Cord/Plug - Approved to AS/NZS 3112

Model Data

- Motor Kw Nominal - 0.55 (3/4)
- Supply Voltage - 240
- Phase - 1
- Full Load Current - 2.5A
- Locked Rotor Current - 8.5A
- Capacitor mfd - 10
- Sound Power Level - 66dBA
- Supply Cord Length - 2m

Performance Chart



Line Drawing


Dimension/Measure - A - 630mm, B - 487mm, C - 121mm, D - 185mm, E - 288mm, F - 290mm